DFR0231-H · DFRobot
This NFC module uses NXP PN532 for smart card compatibility. It features Gravity I2C/UART interfaces, supports 3.3V/5V controllers, and enables contactless transactions. (DFRobot DFR0231-H)
| Part number | DFR0231-H |
|---|---|
| Manufacturer | DFRobot |
| Category | Communication & Wireless › NFC & RFID Readers |
| Pins | 4 |
Gravity: UART & I2C NFC Module pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Grove - 125KHz RFID Reader113020002
PN532 NFC/RFID controller breakout boardADA364
RFID 2 Unit (WS1850S)U031-B
SparkFun RFID Qwiic ReaderSEN-15191
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / QwiicADA4701
Grove - NFC(PN532)113020006
NFC Universal Unit (ST25R3916)U216
SparkFun Qwiic Dynamic NFC/RFID TagSEN-21274