U094 · M5Stack
Unit RS485-ISO is an isolated half-duplex transceiver based on the RS485 bus protocol. It can convert TTL level to RS485 level. In the communication link of devices, various electrical noises and transient changes in voltage and current may occur. Using the CA-IS3082W as the interface chip can effectively shield these noises and transients, providing full protection for expensive control equipment and reducing the risk of damage. It communicates with RS485 devices on the other end, making it… (M5Stack U094)
| Part number | U094 |
|---|---|
| Manufacturer | M5Stack |
| Category | Communication & Wireless › CAN, RS-485 & RS-232 |
| Pins | 4 |
Isolated RS485 Unit pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 2 | SIG2 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 3 | 5V | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Datasheet
Related parts
Adafruit CAN Bus FeatherWing - MCP2515ADA5709
Adafruit CAN Pal - CAN Bus TransceiverADA5708
Adafruit RS-232 Full Pinout Level-Shifter BreakoutADA5988
SparkFun Transceiver Breakout - MAX3232BOB-11189
Adafruit CAN Bus BFF Add-On for QT PyADA5877
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN ControllerADA5728
Adafruit RS232 Pal - Two Channel UART to RS-232 Level ShiftersADA5987
CANBus Unit(CA-IS3050G)U085