Skip to content

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP

Parts › Sensors › Pressure

SEN0456 · DFRobot

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP photo

Arduino-compatible pressure sensor module measures 15-700kPa. Supports I2C output for fast, accurate readings. Ideal for air pressure detection and experiments. (DFRobot SEN0456)

Part numberSEN0456
ManufacturerDFRobot
CategorySensors › Pressure
Pins4

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP pinout

PinNameTypeDescription
1VCCpower
2GNDground
3C (SCL/TX)bidirectionalI2C SCL, or UART - see the module's pinout
4D (SDA/RX)bidirectionalI2C SDA, or UART - see the module's pinout

Schematic symbol and footprint

VCC1C (SCL/TX)3D (SDA/RX)4GND2
Schematic symbol
1234
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.

Related parts

Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude SensorADA2651
Adafruit BMP388 - Precision Barometric Pressure and AltimeterADA3966
Adafruit BMP390 - Precision Barometric Pressure and AltimeterADA4816
Adafruit BMP580 I2C or SPI Temperature and Pressure SensorADA6411
Adafruit BMP581 I2C or SPI Temperature and Pressure SensorADA6407
Adafruit BMP585 Ported I2C / SPI Temperature and Pressure SensorADA6413
Adafruit BNO055 + BMP280 BFF Add-On for QT PyADA5937
Adafruit LPS22 Pressure Sensor - STEMMA QT / QwiicADA4633