SEN0665 · DFRobot
The Gravity: BMP581 is a high-performance digital barometric pressure and temperature sensor module based on the Bosch BMP581. It features an absolute accuracy of ±0.3 hPa, relative accuracy of ±0.06 hPa/10 kPa, and ultra-low noise of <0.1 Pa. (DFRobot SEN0665)
| Part number | SEN0665 |
|---|---|
| Manufacturer | DFRobot |
| Category | Sensors › Pressure |
| Pins | 4 |
Gravity: BMP581 Barometric Pressure Sensor (±0.3hPa High Accuracy, I2C / UART) pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude SensorADA2651
Adafruit BMP388 - Precision Barometric Pressure and AltimeterADA3966
Adafruit BMP390 - Precision Barometric Pressure and AltimeterADA4816
Adafruit BMP580 I2C or SPI Temperature and Pressure SensorADA6411
Adafruit BMP581 I2C or SPI Temperature and Pressure SensorADA6407
Adafruit BMP585 Ported I2C / SPI Temperature and Pressure SensorADA6413
Adafruit BNO055 + BMP280 BFF Add-On for QT PyADA5937
Adafruit LPS22 Pressure Sensor - STEMMA QT / QwiicADA4633