
DFR1229 · DFRobot

The DFRobot GP8600 is a high-precision 16-bit Digital-to-Analog Converter module designed for converting I2C or PWM digital signals into standard industrial analog outputs. The device supports configurable output ranges including 0-5V, 0-10V, and 4-20mA with a full-scale error of ±0.2%. (DFRobot DFR1229)
| Part number | DFR1229 |
|---|---|
| Manufacturer | DFRobot |
| Category | Motor Drivers & Controllers › Servo & PWM Controllers |
| Pins | 4 |
| Voltage (max) | 10 V |
| Voltage (min) | 5 V |
| Current | 20 mA |
| Resolution | 16 bit |
| Channels | 1 |
| Tolerance | 0.2 % |
Gravity: GP8600 1-Channel I2C & PWM to 0-5V / 0-10V / 4-20mA DAC Module (16-bit) pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts

8-Channel PWM or Servo FeatherWing Add-on For All Feather BoardsADA2928

Adafruit 12-Channel 16-bit PWM LED Driver - SPI InterfaceADA1455

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interfaceADA815

Adafruit 16-Channel PWM / Servo Bonnet for Raspberry PiADA3416

Adafruit 24-Channel 12-bit PWM LED Driver - SPI InterfaceADA1429

Adafruit 555 PWM Output STEMMA - 1.5K~25 KHz or 1.5~250 HzADA5963

Adafruit NeoRGB Stemma - NeoPixel to RGB PWM LEDs and StripsADA5888

8-Channel Servo2 I2C Unit (STM32G031)U222