101020026 · Seeed Studio
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side (Seeed SKU 101020026)
| Part number | 101020026 |
|---|---|
| Manufacturer | Seeed Studio |
| Category | Communication & Wireless › Infrared |
| Pins | 4 |
Grove - Infrared Emitter pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 2 | SIG2 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 3 | VCC | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit Infrared IR Remote Receiver - STEMMA JST PH 2mmADA5939
Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mmADA5990
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver BreakoutADA5970
Adafruit TSSP77038 38KHz Infrared IR Demodulator BreakoutADA5940
Gravity: Digital IR Receiver ModuleDFR0094
Gravity: Digital IR Transmitter ModuleDFR0095
Grove - IR (Infrared) Receiver101020016
Grove Smart IR Gesture Sensor101991067