316010005 · Seeed Studio
The Servo motor is a rotary actuator that allows for precise control of angular position which makes them suitable for use in closed-loop systems where precise position control is needed and is commonly used in electronics. Grove - Servo is a bonus product for Grove lovers as we regulated the three-wire servo into a Grove standard connecter. You can plug and play it as a typical Grove module now, without jumper wires clutter. (Seeed SKU 316010005)
| Part number | 316010005 |
|---|---|
| Manufacturer | Seeed Studio |
| Category | Motor Drivers & Controllers › Servo & PWM Controllers |
| Pins | 4 |
Grove - Servo pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 2 | SIG2 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 3 | VCC | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
8-Channel PWM or Servo FeatherWing Add-on For All Feather BoardsADA2928
Adafruit 12-Channel 16-bit PWM LED Driver - SPI InterfaceADA1455
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interfaceADA815
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry PiADA3416
Adafruit 24-Channel 12-bit PWM LED Driver - SPI InterfaceADA1429
Adafruit 555 PWM Output STEMMA - 1.5K~25 KHz or 1.5~250 HzADA5963
Adafruit NeoRGB Stemma - NeoPixel to RGB PWM LEDs and StripsADA5888
8-Channel Servo2 I2C Unit (STM32G031)U222