
U005 · M5Stack

Unit Angle is a knob switch input Unit, which has a built-in 10K potentiometer. By rotating the knob, its internal resistance value can be changed. A potentiometer is a resistor component with three leads whose resistance can be adjusted according to a certain variation pattern. Based on this principle, the ESP32 can obtain the output voltage of the potentiometer through Port B, and then obtain the corresponding mapped data after AD conversion. In application scenarios requiring continuous… (M5Stack U005)
| Part number | U005 |
|---|---|
| Manufacturer | M5Stack |
| Category | User Input & Controls › Potentiometers & Sliders |
| Pins | 4 |
Mini Angle Unit Rotary Switch with Potentiometer pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 2 | SIG2 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 3 | 5V | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Datasheet
Related parts

Grove - Slide Potentiometer101020036

8-Angle Unit with PotentiometerU154

Adafruit DS1841 I2C Digital 10K Potentiometer BreakoutADA4570

Adafruit DS3502 I2C Digital 10K Potentiometer BreakoutADA4286

Gravity: Analog Rotation Potentiometer Sensor for Arduino - Rotation 300°DFR0054

Gravity: Analog Rotation Potentiometer Sensor for Arduino - Rotation 3600°DFR0058

Gravity: Analog Slide Position (Potentiometer) Sensor For ArduinoDFR0053

Grove - Rotary Angle Sensor101020017