SEN0692 · DFRobot
Add motion, tilt and gesture awareness to Arduino, ESP32 and Raspberry Pi projects without building every event detector from raw data. This Gravity BMI323 6DOF IMU supports I2C/UART, selectable addresses, built-in motion events and GUI-based data visualization. (DFRobot SEN0692)
| Part number | SEN0692 |
|---|---|
| Manufacturer | DFRobot |
| Category | Sensors › Touch & Gesture |
| Pins | 4 |
Gravity: 6DOF IMU Sensor for Motion & Gesture Detection (I2C / UART, Plug & Play) pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121ADA2024
Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121ADA1982
AT42QT1010
CAP1188
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPIADA1602
Grove - 12 Key Capacitive I2C Touch Sensor V2 (MPR121)101020534
Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070ADA1362
Standalone Momentary Capacitive Touch Sensor BreakoutADA1374