DFR0030 · DFRobot
This digital capacitive touch sensor for Arduino projects detects touch through cloth or paper, offering a plug-and-play interface with a 3.3V-5V range. (DFRobot DFR0030)
| Part number | DFR0030 |
|---|---|
| Manufacturer | DFRobot |
| Category | Sensors › Touch & Gesture |
| Pins | 3 |
| Voltage (max) | 5 V |
| Voltage (min) | 3.3 V |
Gravity: Digital Capacitive Touch Sensor for Arduino pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG | bidirectional | Digital or analog signal |
| 2 | VCC | power | |
| 3 | GND | ground |
Schematic symbol and footprint
Footprint: JST PH 2.0 mm 3-pin through-hole (Gravity PH2.0-3P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121ADA2024
Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121ADA1982
AT42QT1010
CAP1188
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPIADA1602
Grove - 12 Key Capacitive I2C Touch Sensor V2 (MPR121)101020534
Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070ADA1362
Standalone Momentary Capacitive Touch Sensor BreakoutADA1374