DFR0563 · DFRobot
The module accurately measures 3.7V lithium battery voltage and power, features low power alerts, and is useful in projects like solar systems and robotics. (DFRobot DFR0563)
| Part number | DFR0563 |
|---|---|
| Manufacturer | DFRobot |
| Category | Power › Batteries & Holders |
| Pins | 4 |
| Voltage (max) | 3.7 V |
Gravity: I2C 3.7V Li Battery Fuel Gauge pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
12mm Coin Cell Breakout BoardADA1868
12mm Coin Cell Breakout w/ On-Off SwitchADA1867
20mm Coin Cell Breakout Board (CR2032)ADA1870
20mm Coin Cell Breakout w/On-Off Switch (CR2032)ADA1871
Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery MonitorADA5580
LilyPad Coin Cell Battery Holder - 20mm (Switched)DEV-13883
Battery Holder CR2032
CR2032 Coin Cell