DFR0486 · DFRobot
The OLED display module offers fast response, lower power use, and is ideal for mobile devices. It supports I2C communication, easy plug-and-play, and Arduino compatibility. (DFRobot DFR0486)
| Part number | DFR0486 |
|---|---|
| Manufacturer | DFRobot |
| Category | Displays & LEDs › OLED |
| Pins | 4 |
Gravity: I2C OLED-128x64 Display pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit 128x64 OLED Bonnet for Raspberry PiADA3531
Adafruit FeatherWing OLED - 128x32 OLED Add-on For FeatherADA2900
Adafruit FeatherWing OLED - 128x64 OLED Add-on For FeatherADA4650
Adafruit MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLEDADA5100
Adafruit Monochrome 1.12" 128x128 OLED Graphic DisplayADA5297
Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry PiADA3527
Grove - OLED Display 1.12'' V2101020452
Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / QwiicADA4440