SEN0575 · DFRobot
The rainfall sensor measures precipitation using a tipping bucket mechanism. It supports I2C/UART outputs and integrates with microcontrollers for easy setup. (DFRobot SEN0575)
| Part number | SEN0575 |
|---|---|
| Manufacturer | DFRobot |
| Category | Power › Voltage Regulators & DC-DC |
| Pins | 4 |
Gravity: Tipping Bucket Rainfall Sensor - I2C & UART pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VCC | power | |
| 2 | GND | ground | |
| 3 | C (SCL/TX) | bidirectional | I2C SCL, or UART - see the module's pinout |
| 4 | D (SDA/RX) | bidirectional | I2C SDA, or UART - see the module's pinout |
Schematic symbol and footprint
Schematic symbol
Footprint: JST PH 2.0 mm 4-pin through-hole (Gravity PH2.0-4P) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit MiniBoost 5V @ 1A - TPS61023ADA4654
LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA MaxADA2745
PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+ADA2030
VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from 5V-12VADA2190
5V Buck Converter Unit(ME3116AM6G)U125
Adafruit 12V Bias Voltage Boost Converter - TPS61040ADA5644
Adafruit TPS65131 Split Power Supply Boost ConverterADA6280
SparkFun Qwiic 5V Boost - AP3012KPRT-28203