105020003 · Seeed Studio
Grove - Vibration Motor consists of one coin type motor which is a permanent magnet coreless DC motor. It vibrates when the input logic is HIGH which can be used to notify the user. Integrated with Grove interface, it provides a simple way to connect with Arduino boards without soldering (A Grove Base Shield is required). (Seeed SKU 105020003)
| Part number | 105020003 |
|---|---|
| Manufacturer | Seeed Studio |
| Category | Motor Drivers & Controllers › Load & Solenoid Drivers |
| Pins | 4 |
Grove - Vibration Motor pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 2 | SIG2 | bidirectional | Signal - see the module's silkscreen (digital, analog or UART) |
| 3 | VCC | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit I2C to 8 Channel Solenoid DriverADA6318
SparkFun Qwiic Haptic Driver - DA7280ROB-17590
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etcADA5648
Gravity: I2C Haptic Motor Driver for LRA Motors (TM6605, 44 Modes)DRI0056
Gravity: Vibration Motor Module For ArduinoDFR0440
Grove - Haptic Motor105020011
Grove - MOSFET for Arduino103020008
Vibration Motor Unit (N20)U059