U059 · M5Stack
Unit Vibrator is a vibration motor Unit. It uses an N20 motor paired with a metal eccentric wheel. Supports 5V power supply voltage, with the output shaft speed of 8800 RPM (no load). Vibration motors are used in various electronic products as notification prompts and for haptic feedback. Features Unidirectional rotation DC 5V power supply Includes 1 x Unit Vibrator 1 x HY2.0-4P Grove Cable (20cm) Applications Haptic feedback Vibration notification alerts Specifications Specification… (M5Stack U059)
| Part number | U059 |
|---|---|
| Manufacturer | M5Stack |
| Category | Motor Drivers & Controllers › Load & Solenoid Drivers |
| Pins | 4 |
| Voltage (max) | 5 V |
Vibration Motor Unit (N20) pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | SIG1 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 2 | SIG2 | bidirectional | PORT.B: GPIO/analog; PORT.C: UART - see the unit's pin map |
| 3 | 5V | power | |
| 4 | GND | ground |
Schematic symbol and footprint
Schematic symbol
Footprint: Grove HY2.0 4-pin through-hole, 2.0 mm pitch — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
Related parts
Adafruit I2C to 8 Channel Solenoid DriverADA6318
SparkFun Qwiic Haptic Driver - DA7280ROB-17590
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etcADA5648
Gravity: I2C Haptic Motor Driver for LRA Motors (TM6605, 44 Modes)DRI0056
Gravity: Vibration Motor Module For ArduinoDFR0440
Grove - Haptic Motor105020011
Grove - MOSFET for Arduino103020008
Grove - Vibration Motor105020003