102010551 · Seeed Studio
The XIAO RA4M1 integrates Renesas' RA4M1 chip (32-bit ARM® Cortex®-M4 MCU up to 48 MHz with FPU) into the classic XIAO form factor. This development board offers 256KB Flash, 32KB SRAM, 8KB EEPROM, a USB 2.0 connector, reset and boot buttons, 3 LEDs, a 14-bit A/D converter, a 12-bit D/A converter, and a CAN BUS interface. With onboard charging circuitry and low-power modes (as low as 45μA), it’s ideal for battery-powered applications. Sharing the same 32-bit microcontroller as the Arduino Uno R4, it's natively compatible with Arduino IDE, making it the perfect starting point for… (Seeed SKU 102010551; also 102010638)
| Part number | 102010551 |
|---|---|
| Manufacturer | Seeed Studio |
| Category | Development Boards › Other ARM & RISC-V Boards |
| Pins | 14 |
| Current | 45 µA |
| Frequency | 48 MHz |
| Resolution | 32 bit |
Seeed Studio XIAO RA4M1 pinout
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | D0/A0 | bidirectional | |
| 2 | D1/A1 | bidirectional | |
| 3 | D2/A2 | bidirectional | |
| 4 | D3/A3 | bidirectional | |
| 5 | D4/SDA | bidirectional | |
| 6 | D5/SCL | bidirectional | |
| 7 | D6/TX | bidirectional | |
| 8 | D7/RX | bidirectional | |
| 9 | D8/SCK | bidirectional | |
| 10 | D9/MISO | bidirectional | |
| 11 | D10/MOSI | bidirectional | |
| 12 | 3V3 | power | |
| 13 | GND | ground | |
| 14 | 5V | power |
Schematic symbol and footprint
Schematic symbol
Footprint: Seeed Studio XIAO (2 x 7, 15.24 mm rows) — to scale, pad 1 in yellow (mm). Check against the datasheet before ordering PCBs.
